Netgear Extender Keeps Rebooting? Let’s Fix it!
It is undoubtedly true that the Netgear extender is one of the amazing networking devices in the digital realm. But, being an awesome device it also has technical complications and most recently users face the Netgear extender that keeps rebooting issues. When they going to access the Netgear Genie Smart Setup. If you are also suffering from the same kind of issue and trying to find out the reasons and are not able to figure out the issue, then you have come to the right place.
In this article, we cover all the reasons that lead to this issue along with the troubleshooting tips so that you can fix the issue in less time. Read on!
First, we would like to put some light on the contributing factors that are dragging you to face the Netgear extender keeps rebooting issue. By knowing all the factors you will able to remove the issue from its roots.
Reasons: Netgear Extender Keeps Rebooting
Several possible reasons cause this issue on the extender. All the reasons are mentioned below. So, take a walk through them and get familiarized.
Sometimes, Netgear extender becomes the victim of technical glitches due to over-usage. So, there is a possibility that the same thing is to happen to you.
In Sufficient Power Supply
Electricity is the most important to power up the device. But, when the device gets insufficient power from the electricity source then it leads to the issues with extender.
If your device runs on its outdated firmware version then it could put your device at higher risk and stop the functions of the device.
WiFi interference also could be the reason; if you install the extender near to home appliance then your extender may become the victim of WiFi interference.
Hence, these are the most common reasons that usually cause the extender to keep rebooting issue. If you want to fix the issue hassle-free then move to the next hack.
Fix: Netgear Extender Keeps Rebooting
Before we jump into the troubleshooting tips, you should perform the small reboot process because it is seen that most of the users solve this issue by restarting the device. So, there is a possibility that you are in luck and will be able to solve the issue.
If you don’t know the restart process, then try to follow the following point:
1) Initially, turn off the device and remove it from which you plug it.
2) Thereafter, wait for some time until the device is recovered from technical glitches.
3) Now, plug the extender back into its respective wall outlet.
Turn on the device and use the device to ensure whether the issue is resolved or not. If not, then move to the next possible hack.
Check the Power Supply
Now, you need to check the electricity source in which you plug in the extender to ensure you use the non-damaged power socket or not. In case you find any damage to the wall outlet, then try to change it or repair it if possible.
Check the Cable Connections
If you use the Ethernet cable or power cable to make the connection between the devices, then try to cross-check the cables as well as the connections. The reason is, sometimes users damaged the cables mistakenly and keep using them which leads the issues.
Therefore, if you find any damage or fault in the cable while checking, then try to change the cable as soon as possible to resolve the issue.
Update Extender Firmware
If you are still in the same issue then try to check the firmware version of the device because sometimes users forget to update the device and keep using outdated firmware which puts the device at higher risk.
Check the firmware of the device to ensure that you access the Netgear_ext (SSID) of the extender. Thereafter, access the default web address of the device and check the firmware version. If you found an old firmware version, then update it at the same time.
Hence, these are the troubleshooting tips that you need to perform to tackle the Netgear extender keeps rebooting issue. Once the issue is resolved, access the fast blazing internet and stream HD videos and many more things.